Wyred 4 Sound ST-1000 II Maximize

Wyred 4 Sound ST-1000 II

570W (8 ohm) or 1140W (4 ohm) Class D stereo power amplifier with XLR and RCA inputs. Available in silver and black. Now fitted as standard with upgraded WBT binding posts and Kimber hookup wire.

More details

£ 1,999.00

Our ultra-high end ST-500 mkII and ST-1000 mkII amplifiers deliver all the refinements of our award-winning mAMP monoblocks with the convenience of one component. As with the mAMP, both the ST-500 mkII and ST-1000 mkII are built on the latest generation of ICEpower® technology and boast a 3rd generation input stage that produces smooth upper-mids and low and tight bass. With 14AWG OFC wiring direct soldered to gold plated 5-way binding posts, optimum power delivery and reference audio quality is guaranteed.

Whether using balanced or unbalanced inputs, the dual differential common mode converter ensures a perfectly balanced signal is fed to the power amp, while the quad FET buffer optimizes synergy between components. Ruggedly built yet exhibiting a smoothly toned industrial design, our STmkII series showcases unmatched value and performance.

  • Typical THD+N 8Ω (10W out): 0.001%
  • Power Output 8Ω @ 0.2% THD+N: 460W
  • Power Output 8Ω @ 1.0% THD+N: 480W
  • Power Output 4Ω @ 0.2% THD+N: 725W
  • Power Output 4Ω @ 1.0% THD+N: 775W
  • Output Idle Noise (A Wt.): <215µV
  • Frequency Response 20Hz-20kHz (8Ω @ 10W): ± 0.15db
  • Lower Bandwidth: 1.5Hz all loads
  • Balanced Input Impedance: 92kΩ
  • Unbalanced Input Impedance: 92kΩ
  • Dynamic Range (A Wt.): 108db
  • Gain: 30.7db
  • Sensitivity: 1.75V
  • Output Impedance: 0.021Ω
  • Min Load: 4Ω
  • Max Output Current: 30A
  • Idle Power Consumption: <28W
  • Standby Power Consumption: <0.5W
  • Dimensions: L 13.75"  W 15.75"  H 4.625"
  • Utilizes latest generation (ASX2) ICEpower® audio technology
  • Up to 460wpc in 8Ω
  • External selectable mains voltage 115/230VAC
  • Idle power consumption 28w
  • Dual-mono design
  • Differential, fully-balanced
  • Thermal protection
  • Over current protection
  • Sound optimized soft clip
  • Robust construction
  • Standard 12V DC Trigger
  • Machined and anodized aluminum front panel
  • Gold Plated unbalanced (RCA) input
  • Neutrix Balanced (XLR) input
  • 3rd Generation fully balanced input stage with impedance of 92k
  • Covered by a 5 YEAR WARRANTY

 

No customer comments for the moment.

Write your review

Wyred 4 Sound ST-1000 II

Wyred 4 Sound ST-1000 II

570W (8 ohm) or 1140W (4 ohm) Class D stereo power amplifier with XLR and RCA inputs. Available in silver and black. Now fitted as standard with upgraded WBT binding posts and Kimber hookup wire.

Write your review

Offer

Contact us

Our support hotline is available 24/7.

Phone01242 692455 / 0871 288 7481

Contact our expert support team!